/* $OpenBSD: mptramp.s,v 1.10 2008/06/26 05:42:10 ray Exp $ */ /*- * Copyright (c) 2000 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by RedBack Networks Inc. * * Author: Bill Sommerfeld * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Copyright (c) 1999 Stefan Grefen * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR AND CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * MP startup ... * the stuff from cpu_spinup_trampoline to mp_startup * is copied into the first 640 KB * * We startup the processors now when the kthreads become ready. * The steps are: * 1) Get the processors running kernel-code from a special * page-table and stack page, do chip identification. * 2) halt the processors waiting for them to be enabled * by a idle-thread */ #include "assym.h" #include #include #include #include #include #include #include #define GDTE(a,b) .byte 0xff,0xff,0x0,0x0,0x0,a,b,0x0 #define _RELOC(x) ((x) - KERNBASE) #define RELOC(x) _RELOC(_C_LABEL(x)) #define _TRMP_LABEL(a) a = . - _C_LABEL(cpu_spinup_trampoline) + MP_TRAMPOLINE /* * Debug code to stop aux. processors in various stages based on the * value in cpu_trace. * * %edi points at cpu_trace; cpu_trace[0] is the "hold point"; * cpu_trace[1] is the point which the cpu has reached. * cpu_trace[2] is the last value stored by HALTT. */ #ifdef MPDEBUG #define HALT(x) 1: movl (%edi),%ebx;cmpl $ x,%ebx ; jle 1b ; movl $x,4(%edi) #define HALTT(x,y) movl y,8(%edi); HALT(x) #else #define HALT(x) /**/ #define HALTT(x,y) /**/ #endif .globl _C_LABEL(cpu),_C_LABEL(cpu_id),_C_LABEL(cpu_vendor) .globl _C_LABEL(cpuid_level),_C_LABEL(cpu_feature) .global _C_LABEL(cpu_spinup_trampoline) .global _C_LABEL(cpu_spinup_trampoline_end) .global _C_LABEL(cpu_hatch) .global _C_LABEL(mp_pdirpa) .global _C_LABEL(gdt), _C_LABEL(local_apic) .text .align 4,0x0 .code16 _C_LABEL(cpu_spinup_trampoline): cli xorw %ax, %ax movw %ax, %ds movw %ax, %es movw %ax, %ss data32 addr32 lgdt (gdt_desc) # load flat descriptor table movl %cr0, %eax # get cr0 orl $0x1, %eax # enable protected mode movl %eax, %cr0 # doit ljmp $0x8, $mp_startup _TRMP_LABEL(mp_startup) .code32 movl $0x10, %eax # data segment movw %ax, %ds movw %ax, %ss movw %ax, %es movw %ax, %fs movw %ax, %gs movl $(MP_TRAMPOLINE+NBPG-16),%esp # bootstrap stack end, # with scratch space.. #ifdef MPDEBUG leal RELOC(cpu_trace),%edi #endif HALT(0x1) /* First, reset the PSL. */ pushl $PSL_MBO popfl movl RELOC(mp_pdirpa),%ecx HALTT(0x5,%ecx) /* Load base of page directory and enable mapping. */ movl %ecx,%cr3 # load ptd addr into mmu movl %cr0,%eax # get control word # enable paging & NPX emulation orl $(CR0_PE|CR0_PG|CR0_NE|CR0_TS|CR0_EM|CR0_MP|CR0_WP),%eax movl %eax,%cr0 # and let's page NOW! #ifdef MPDEBUG leal _C_LABEL(cpu_trace),%edi #endif HALT(0x6) # ok, we're now running with paging enabled and sharing page tables with cpu0. # figure out which processor we really are, what stack we should be on, etc. movl _C_LABEL(local_apic)+LAPIC_ID,%ecx shrl $LAPIC_ID_SHIFT,%ecx leal 0(,%ecx,4),%ecx movl _C_LABEL(cpu_info)(%ecx),%ecx HALTT(0x7, %ecx) # %ecx points at our cpu_info structure.. movw $((MAXGDTSIZ*8) - 1), 6(%esp) # prepare segment descriptor movl CPU_INFO_GDT(%ecx), %eax # for real gdt movl %eax, 8(%esp) HALTT(0x8, %eax) lgdt 6(%esp) HALT(0x9) jmp 1f nop 1: HALT(0xa) movl $GSEL(GDATA_SEL, SEL_KPL),%eax #switch to new segment HALTT(0x10, %eax) movw %ax,%ds HALT(0x11) movw %ax,%es HALT(0x12) movw %ax,%ss HALT(0x13) pushl $GSEL(GCODE_SEL, SEL_KPL) pushl $mp_cont HALT(0x14) lret .align 4,0x0 _TRMP_LABEL(gdt_table) .word 0x0,0x0,0x0,0x0 # null GDTE GDTE(0x9f,0xcf) # Kernel text GDTE(0x93,0xcf) # Kernel data _TRMP_LABEL(gdt_desc) .word 0x17 # limit 3 entries .long gdt_table # where is gdt _C_LABEL(cpu_spinup_trampoline_end): #end of code copied to MP_TRAMPOLINE mp_cont: movl CPU_INFO_IDLE_PCB(%ecx),%esi # %esi now points at our PCB. HALTT(0x19, %esi) movl PCB_ESP(%esi),%esp movl PCB_EBP(%esi),%ebp HALT(0x20) /* Switch address space. */ movl PCB_CR3(%esi),%eax HALTT(0x22, %eax) movl %eax,%cr3 HALT(0x25) /* Load segment registers. */ movl $GSEL(GCPU_SEL, SEL_KPL),%eax HALTT(0x26,%eax) movl %eax,%fs xorl %eax,%eax HALTT(0x27,%eax) movl %eax,%gs movl PCB_CR0(%esi),%eax HALTT(0x28,%eax) movl %eax,%cr0 HALTT(0x30,%ecx) pushl %ecx call _C_LABEL(cpu_hatch) /* NOTREACHED */ .data _C_LABEL(mp_pdirpa): .long 0 #ifdef MPDEBUG .global _C_LABEL(cpu_trace) _C_LABEL(cpu_trace): .long 0x40 .long 0xff .long 0xff #endif