/* $OpenBSD: asms.c,v 1.7 2008/04/25 16:37:44 xsa Exp $ */ /* * Copyright (c) 2005 Xavier Santolaria * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ /* * A driver for the Apple Sudden Motion Sensor based on notes from * http://johannes.sipsolutions.net/PowerBook/Apple_Motion_Sensor_Specification */ #include #include #include #include #include /* ASMS Registers */ #define ASMS_REG_COMMAND 0x00 #define ASMS_REG_STATUS 0x01 #define ASMS_REG_RCONTROL1 0x02 #define ASMS_REG_RCONTROL2 0x03 #define ASMS_REG_RCONTROL3 0x04 #define ASMS_REG_RDATA1 0x05 #define ASMS_REG_RDATA2 0x06 #define ASMS_REG_DATA_X 0x20 #define ASMS_REG_DATA_Y 0x21 #define ASMS_REG_DATA_Z 0x22 #define ASMS_REG_SENS_LOW 0x26 /* init with 0x15 */ #define ASMS_REG_SENS_HIGH 0x27 /* init with 0x60 */ #define ASMS_REG_CONTROL_X 0x28 /* init with 0x08 */ #define ASMS_REG_CONTROL_Y 0x29 /* init with 0x0f */ #define ASMS_REG_CONTROL_Z 0x2a /* init with 0x4f */ #define ASMS_REG_UNKNOWN1 0x2b /* init with 0x14 */ #define ASMS_REG_VENDOR 0x2e #define ASMS_CMD_READ_VER 0x01 #define ASMS_CMD_READ_MEM 0x02 #define ASMS_CMD_RESET 0x07 #define ASMS_CMD_START 0x08 /* Sensors */ #define ASMS_DATA_X 0 #define ASMS_DATA_Y 1 #define ASMS_DATA_Z 2 #define ASMS_NUM_SENSORS 3 struct asms_softc { struct device sc_dev; i2c_tag_t sc_tag; i2c_addr_t sc_addr; struct ksensor sc_sensor[ASMS_NUM_SENSORS]; struct ksensordev sc_sensordev; }; int asms_match(struct device *, void *, void *); void asms_attach(struct device *, struct device *, void *); void asms_refresh(void *); struct cfattach asms_ca = { sizeof(struct asms_softc), asms_match, asms_attach }; struct cfdriver asms_cd = { NULL, "asms", DV_DULL }; int asms_match(struct device *parent, void *match, void *aux) { struct i2c_attach_args *ia = aux; if (strcmp(ia->ia_name, "AAPL,accelerometer_1") == 0) return (1); return (0); } void asms_attach(struct device *parent, struct device *self, void *aux) { struct asms_softc *sc = (struct asms_softc *)self; struct i2c_attach_args *ia = aux; u_int8_t cmd, data, rev1, rev2, ver1, ver2; int i, vflag = 0; sc->sc_tag = ia->ia_tag; sc->sc_addr = ia ->ia_addr; iic_acquire_bus(sc->sc_tag, 0); cmd = ASMS_REG_COMMAND; data = ASMS_CMD_START; if (iic_exec(sc->sc_tag, I2C_OP_WRITE_WITH_STOP, sc->sc_addr, &cmd, sizeof cmd, &data, sizeof data, 0)) { iic_release_bus(sc->sc_tag, 0); printf(": cannot write command register\n"); return; } delay(10000); cmd = ASMS_REG_RCONTROL1; data = 0x02; if (iic_exec(sc->sc_tag, I2C_OP_WRITE_WITH_STOP, sc->sc_addr, &cmd, sizeof cmd, &data, sizeof data, 0)) { iic_release_bus(sc->sc_tag, 0); printf(": cannot write read control register\n"); return; } cmd = ASMS_REG_RCONTROL2; data = 0x85; if (iic_exec(sc->sc_tag, I2C_OP_WRITE_WITH_STOP, sc->sc_addr, &cmd, sizeof cmd, &data, sizeof data, 0)) { iic_release_bus(sc->sc_tag, 0); printf(": cannot write read control register\n"); return; } cmd = ASMS_REG_RCONTROL3; data = 0x01; if (iic_exec(sc->sc_tag, I2C_OP_WRITE_WITH_STOP, sc->sc_addr, &cmd, sizeof cmd, &data, sizeof data, 0)) { iic_release_bus(sc->sc_tag, 0); printf(": cannot write read control register\n"); return; } cmd = ASMS_REG_COMMAND; data = ASMS_CMD_READ_MEM; if (iic_exec(sc->sc_tag, I2C_OP_WRITE_WITH_STOP, sc->sc_addr, &cmd, sizeof cmd, &data, sizeof data, 0)) { iic_release_bus(sc->sc_tag, 0); printf(": cannot write command register\n"); return; } delay(10000); cmd = ASMS_REG_RDATA1; if (iic_exec(sc->sc_tag, I2C_OP_READ_WITH_STOP, sc->sc_addr, &cmd, sizeof cmd, &rev1, sizeof rev1, 0)) { iic_release_bus(sc->sc_tag, 0); printf(": cannot read data register\n"); return; } cmd = ASMS_REG_RDATA2; if (iic_exec(sc->sc_tag, I2C_OP_READ_WITH_STOP, sc->sc_addr, &cmd, sizeof cmd, &rev2, sizeof rev2, 0)) { iic_release_bus(sc->sc_tag, 0); printf(": cannot read data register\n"); return; } cmd = ASMS_REG_COMMAND; data = ASMS_CMD_READ_VER; if (iic_exec(sc->sc_tag, I2C_OP_WRITE_WITH_STOP, sc->sc_addr, &cmd, sizeof cmd, &data, sizeof data, 0)) { iic_release_bus(sc->sc_tag, 0); printf(": cannot write command register\n"); return; } delay(10000); cmd = ASMS_REG_RDATA1; if (iic_exec(sc->sc_tag, I2C_OP_READ_WITH_STOP, sc->sc_addr, &cmd, sizeof cmd, &ver1, sizeof ver1, 0)) { iic_release_bus(sc->sc_tag, 0); printf(": cannot read data register\n"); return; } cmd = ASMS_REG_RDATA2; if (iic_exec(sc->sc_tag, I2C_OP_READ_WITH_STOP, sc->sc_addr, &cmd, sizeof cmd, &ver2, sizeof ver2, 0)) { iic_release_bus(sc->sc_tag, 0); printf(": cannot read data register\n"); return; } cmd = ASMS_REG_VENDOR; if (iic_exec(sc->sc_tag, I2C_OP_READ_WITH_STOP, sc->sc_addr, &cmd, sizeof cmd, &data, sizeof data, 0)) { iic_release_bus(sc->sc_tag, 0); printf(": cannot read vendor register\n"); return; } if (data & 0x10) vflag = 1; cmd = ASMS_REG_SENS_LOW; data = 0x15; if (iic_exec(sc->sc_tag, I2C_OP_WRITE_WITH_STOP, sc->sc_addr, &cmd, sizeof cmd, &data, sizeof data, 0)) { iic_release_bus(sc->sc_tag, 0); printf(": cannot write sensibility low register\n"); return; } cmd = ASMS_REG_SENS_HIGH; data = 0x60; if (iic_exec(sc->sc_tag, I2C_OP_WRITE_WITH_STOP, sc->sc_addr, &cmd, sizeof cmd, &data, sizeof data, 0)) { iic_release_bus(sc->sc_tag, 0); printf(": cannot write sensibility high register\n"); return; } cmd = ASMS_REG_CONTROL_X; data = 0x08; if (iic_exec(sc->sc_tag, I2C_OP_WRITE_WITH_STOP, sc->sc_addr, &cmd, sizeof cmd, &data, sizeof data, 0)) { iic_release_bus(sc->sc_tag, 0); printf(": cannot write control X register\n"); return; } cmd = ASMS_REG_CONTROL_Y; data= 0x0f; if (iic_exec(sc->sc_tag, I2C_OP_WRITE_WITH_STOP, sc->sc_addr, &cmd, sizeof cmd, &data, sizeof data, 0)) { iic_release_bus(sc->sc_tag, 0); printf(": cannot write control Y register\n"); return; } cmd = ASMS_REG_CONTROL_Z; data = 0x4f; if (iic_exec(sc->sc_tag, I2C_OP_WRITE_WITH_STOP, sc->sc_addr, &cmd, sizeof cmd, &data, sizeof data, 0)) { iic_release_bus(sc->sc_tag, 0); printf(": cannot write control Z register\n"); return; } cmd = ASMS_REG_UNKNOWN1; data = 0x14; if (iic_exec(sc->sc_tag, I2C_OP_WRITE_WITH_STOP, sc->sc_addr, &cmd, sizeof cmd, &data, sizeof data, 0)) { iic_release_bus(sc->sc_tag, 0); printf(": cannot write unknown 1 register\n"); return; } iic_release_bus(sc->sc_tag, 0); printf(": rev %x.%x, version %x.%x", rev1, rev2, ver1, ver2); /* Initialize sensor data. */ strlcpy(sc->sc_sensordev.xname, sc->sc_dev.dv_xname, sizeof(sc->sc_sensordev.xname)); sc->sc_sensor[ASMS_DATA_X].type = SENSOR_INTEGER; strlcpy(sc->sc_sensor[ASMS_DATA_X].desc, "X_ACCEL", sizeof(sc->sc_sensor[ASMS_DATA_X].desc)); sc->sc_sensor[ASMS_DATA_Y].type = SENSOR_INTEGER; strlcpy(sc->sc_sensor[ASMS_DATA_Y].desc, "Y_ACCEL", sizeof(sc->sc_sensor[ASMS_DATA_Y].desc)); sc->sc_sensor[ASMS_DATA_Z].type = SENSOR_INTEGER; strlcpy(sc->sc_sensor[ASMS_DATA_Z].desc, "Z_ACCEL", sizeof(sc->sc_sensor[ASMS_DATA_Z].desc)); if (sensor_task_register(sc, asms_refresh, 5) == NULL) { printf(": unable to register update task\n"); return; } for (i = 0; i < ASMS_NUM_SENSORS; i++) sensor_attach(&sc->sc_sensordev, &sc->sc_sensor[i]); sensordev_install(&sc->sc_sensordev); printf("\n"); } void asms_refresh(void *arg) { struct asms_softc *sc = arg; u_int8_t cmd; int8_t sdata; iic_acquire_bus(sc->sc_tag, 0); cmd = ASMS_REG_DATA_X; if (iic_exec(sc->sc_tag, I2C_OP_READ_WITH_STOP, sc->sc_addr, &cmd, sizeof cmd, &sdata, sizeof sdata, 0) == 0) sc->sc_sensor[ASMS_DATA_X].value = sdata; cmd = ASMS_REG_DATA_Y; if (iic_exec(sc->sc_tag, I2C_OP_READ_WITH_STOP, sc->sc_addr, &cmd, sizeof cmd, &sdata, sizeof sdata, 0) == 0) sc->sc_sensor[ASMS_DATA_Y].value = sdata; cmd = ASMS_REG_DATA_Z; if (iic_exec(sc->sc_tag, I2C_OP_READ_WITH_STOP, sc->sc_addr, &cmd, sizeof cmd, &sdata, sizeof sdata, 0) == 0) sc->sc_sensor[ASMS_DATA_Z].value = sdata; iic_release_bus(sc->sc_tag, 0); }