/* $OpenBSD: stp4020.c,v 1.15 2008/06/26 05:42:18 ray Exp $ */ /* $NetBSD: stp4020.c,v 1.23 2002/06/01 23:51:03 lukem Exp $ */ /*- * Copyright (c) 1998 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Paul Kranenburg. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * STP4020: SBus/PCMCIA bridge supporting one Type-3 PCMCIA card, or up to * two Type-1 and Type-2 PCMCIA cards.. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * We use the three available windows per socket in a simple, fixed * arrangement. Each window maps (at full 1 MB size) one of the pcmcia * spaces into sbus space. */ #define STP_WIN_ATTR 0 /* index of the attribute memory space window */ #define STP_WIN_MEM 1 /* index of the common memory space window */ #define STP_WIN_IO 2 /* index of the io space window */ #ifdef STP4020_DEBUG int stp4020_debug = 0; #define DPRINTF(x) do { if (stp4020_debug) printf x; } while(0) #else #define DPRINTF(x) #endif int stp4020print(void *, const char *); void stp4020_map_window(struct stp4020_socket *, int, int); void stp4020_calc_speed(int, int, int *, int *); struct cfdriver stp_cd = { NULL, "stp", DV_DULL }; #ifdef STP4020_DEBUG static void stp4020_dump_regs(struct stp4020_socket *); #endif static u_int16_t stp4020_rd_sockctl(struct stp4020_socket *, int); static void stp4020_wr_sockctl(struct stp4020_socket *, int, u_int16_t); static u_int16_t stp4020_rd_winctl(struct stp4020_socket *, int, int); static void stp4020_wr_winctl(struct stp4020_socket *, int, int, u_int16_t); void stp4020_delay(unsigned int); void stp4020_attach_socket(struct stp4020_socket *, int); void stp4020_create_event_thread(void *); void stp4020_event_thread(void *); void stp4020_queue_event(struct stp4020_softc *, int); int stp4020_chip_mem_alloc(pcmcia_chipset_handle_t, bus_size_t, struct pcmcia_mem_handle *); void stp4020_chip_mem_free(pcmcia_chipset_handle_t, struct pcmcia_mem_handle *); int stp4020_chip_mem_map(pcmcia_chipset_handle_t, int, bus_addr_t, bus_size_t, struct pcmcia_mem_handle *, bus_size_t *, int *); void stp4020_chip_mem_unmap(pcmcia_chipset_handle_t, int); int stp4020_chip_io_alloc(pcmcia_chipset_handle_t, bus_addr_t, bus_size_t, bus_size_t, struct pcmcia_io_handle *); void stp4020_chip_io_free(pcmcia_chipset_handle_t, struct pcmcia_io_handle *); int stp4020_chip_io_map(pcmcia_chipset_handle_t, int, bus_addr_t, bus_size_t, struct pcmcia_io_handle *, int *); void stp4020_chip_io_unmap(pcmcia_chipset_handle_t, int); void stp4020_chip_socket_enable(pcmcia_chipset_handle_t); void stp4020_chip_socket_disable(pcmcia_chipset_handle_t); void *stp4020_chip_intr_establish(pcmcia_chipset_handle_t, struct pcmcia_function *, int, int (*) (void *), void *, char *); void stp4020_chip_intr_disestablish(pcmcia_chipset_handle_t, void *); const char *stp4020_chip_intr_string(pcmcia_chipset_handle_t, void *); /* Our PCMCIA chipset methods */ static struct pcmcia_chip_functions stp4020_functions = { stp4020_chip_mem_alloc, stp4020_chip_mem_free, stp4020_chip_mem_map, stp4020_chip_mem_unmap, stp4020_chip_io_alloc, stp4020_chip_io_free, stp4020_chip_io_map, stp4020_chip_io_unmap, stp4020_chip_intr_establish, stp4020_chip_intr_disestablish, stp4020_chip_intr_string, stp4020_chip_socket_enable, stp4020_chip_socket_disable }; static __inline__ u_int16_t stp4020_rd_sockctl(h, idx) struct stp4020_socket *h; int idx; { int o = ((STP4020_SOCKREGS_SIZE * (h->sock)) + idx); return (bus_space_read_2(h->tag, h->regs, o)); } static __inline__ void stp4020_wr_sockctl(h, idx, v) struct stp4020_socket *h; int idx; u_int16_t v; { int o = (STP4020_SOCKREGS_SIZE * (h->sock)) + idx; bus_space_write_2(h->tag, h->regs, o, v); } static __inline__ u_int16_t stp4020_rd_winctl(h, win, idx) struct stp4020_socket *h; int win; int idx; { int o = (STP4020_SOCKREGS_SIZE * (h->sock)) + (STP4020_WINREGS_SIZE * win) + idx; return (bus_space_read_2(h->tag, h->regs, o)); } static __inline__ void stp4020_wr_winctl(h, win, idx, v) struct stp4020_socket *h; int win; int idx; u_int16_t v; { int o = (STP4020_SOCKREGS_SIZE * (h->sock)) + (STP4020_WINREGS_SIZE * win) + idx; bus_space_write_2(h->tag, h->regs, o, v); } int stp4020print(aux, busname) void *aux; const char *busname; { struct pcmciabus_attach_args *paa = aux; struct stp4020_socket *h = paa->pch; printf(" socket %d", h->sock); return (UNCONF); } /* * Attach all the sub-devices we can find */ void stpattach_common(struct stp4020_softc *sc, int clockfreq) { int i, rev; rev = stp4020_rd_sockctl(&sc->sc_socks[0], STP4020_ISR1_IDX) & STP4020_ISR1_REV_M; printf(": rev %x\n", rev); sc->sc_pct = (pcmcia_chipset_tag_t)&stp4020_functions; /* * Arrange that a kernel thread be created to handle * insert/removal events. */ sc->events = 0; kthread_create_deferred(stp4020_create_event_thread, sc); for (i = 0; i < STP4020_NSOCK; i++) { struct stp4020_socket *h = &sc->sc_socks[i]; h->sock = i; h->sc = sc; #ifdef STP4020_DEBUG if (stp4020_debug) stp4020_dump_regs(h); #endif stp4020_attach_socket(h, clockfreq); } } void stp4020_attach_socket(h, speed) struct stp4020_socket *h; int speed; { struct pcmciabus_attach_args paa; int v; /* Map all three windows */ stp4020_map_window(h, STP_WIN_ATTR, speed); stp4020_map_window(h, STP_WIN_MEM, speed); stp4020_map_window(h, STP_WIN_IO, speed); /* Configure one pcmcia device per socket */ paa.paa_busname = "pcmcia"; paa.pct = (pcmcia_chipset_tag_t)h->sc->sc_pct; paa.pch = (pcmcia_chipset_handle_t)h; paa.iobase = 0; paa.iosize = STP4020_WINDOW_SIZE; h->pcmcia = config_found(&h->sc->sc_dev, &paa, stp4020print); if (h->pcmcia == NULL) return; /* * There's actually a pcmcia bus attached; initialize the slot. */ /* * Clear things up before we enable status change interrupts. * This seems to not be fully initialized by the PROM. */ stp4020_wr_sockctl(h, STP4020_ICR1_IDX, 0); stp4020_wr_sockctl(h, STP4020_ICR0_IDX, 0); stp4020_wr_sockctl(h, STP4020_ISR1_IDX, 0x3fff); stp4020_wr_sockctl(h, STP4020_ISR0_IDX, 0x3fff); /* * Enable socket status change interrupts. * We use SB_INT[1] for status change interrupts. */ v = STP4020_ICR0_ALL_STATUS_IE | STP4020_ICR0_SCILVL_SB1; stp4020_wr_sockctl(h, STP4020_ICR0_IDX, v); /* Get live status bits from ISR0 */ v = stp4020_rd_sockctl(h, STP4020_ISR0_IDX); h->sense = v & (STP4020_ISR0_CD1ST | STP4020_ISR0_CD2ST); if (h->sense != 0) { h->flags |= STP4020_SOCKET_BUSY; pcmcia_card_attach(h->pcmcia); } } /* * Deferred thread creation callback. */ void stp4020_create_event_thread(arg) void *arg; { struct stp4020_softc *sc = arg; const char *name = sc->sc_dev.dv_xname; if (kthread_create(stp4020_event_thread, sc, &sc->event_thread, "%s", name)) { panic("%s: unable to create event thread", name); } } /* * The actual event handling thread. */ void stp4020_event_thread(arg) void *arg; { struct stp4020_softc *sc = arg; int s, sense; unsigned int socket; for (;;) { struct stp4020_socket *h; s = splhigh(); if ((socket = ffs(sc->events)) == 0) { splx(s); (void)tsleep(&sc->events, PWAIT, "stp4020_ev", 0); continue; } socket--; sc->events &= ~(1 << socket); splx(s); if (socket >= STP4020_NSOCK) { #ifdef DEBUG printf("stp4020_event_thread: wayward socket number %d\n", socket); #endif continue; } h = &sc->sc_socks[socket]; /* Read socket's ISR0 for the interrupt status bits */ sense = stp4020_rd_sockctl(h, STP4020_ISR0_IDX) & (STP4020_ISR0_CD1ST | STP4020_ISR0_CD2ST); if (sense > h->sense) { /* * If at least one more sensor is asserted, this is * a card insertion. */ h->sense = sense; if ((h->flags & STP4020_SOCKET_BUSY) == 0) { h->flags |= STP4020_SOCKET_BUSY; pcmcia_card_attach(h->pcmcia); } } else if (sense < h->sense) { /* * If at least one less sensor is asserted, this is * a card removal. */ h->sense = sense; if (h->flags & STP4020_SOCKET_BUSY) { h->flags &= ~STP4020_SOCKET_BUSY; pcmcia_card_detach(h->pcmcia, DETACH_FORCE); } } } } void stp4020_queue_event(sc, sock) struct stp4020_softc *sc; int sock; { int s; s = splhigh(); sc->events |= (1 << sock); splx(s); wakeup(&sc->events); } int stp4020_statintr(arg) void *arg; { struct stp4020_softc *sc = arg; int i, sense, r = 0; /* * Check each socket for pending requests. */ for (i = 0 ; i < STP4020_NSOCK; i++) { struct stp4020_socket *h; int v; h = &sc->sc_socks[i]; /* Read socket's ISR0 for the interrupt status bits */ v = stp4020_rd_sockctl(h, STP4020_ISR0_IDX); sense = v & (STP4020_ISR0_CD1ST | STP4020_ISR0_CD2ST); #ifdef STP4020_DEBUG if (stp4020_debug != 0) printf("stp4020_statintr: ISR0=%b\n", v, STP4020_ISR0_IOBITS); #endif /* Ack all interrupts at once */ stp4020_wr_sockctl(h, STP4020_ISR0_IDX, STP4020_ISR0_ALL_STATUS_IRQ); if ((v & STP4020_ISR0_CDCHG) != 0) { r = 1; /* * Card detect status changed. In an ideal world, * both card detect sensors should be set if a card * is in the slot, and clear if it is not. * * Unfortunately, it turns out that we can get the * notification before both sensors are set (or * clear). * * This can be very funny if only one sensor is set. * Is this a removal or an insertion operation? * Defer appropriate action to the worker thread. */ if (sense != h->sense) stp4020_queue_event(sc, i); } /* informational messages */ if ((v & STP4020_ISR0_BVD1CHG) != 0) { DPRINTF(("stp4020[%d]: Battery change 1\n", h->sock)); r = 1; } if ((v & STP4020_ISR0_BVD2CHG) != 0) { DPRINTF(("stp4020[%d]: Battery change 2\n", h->sock)); r = 1; } if ((v & STP4020_ISR0_RDYCHG) != 0) { DPRINTF(("stp4020[%d]: Ready/Busy change\n", h->sock)); r = 1; } if ((v & STP4020_ISR0_WPCHG) != 0) { DPRINTF(("stp4020[%d]: Write protect change\n", h->sock)); r = 1; } if ((v & STP4020_ISR0_PCTO) != 0) { DPRINTF(("stp4020[%d]: Card access timeout\n", h->sock)); r = 1; } if ((v & STP4020_ISR0_SCINT) != 0) { DPRINTF(("stp4020[%d]: Status change\n", h->sock)); r = 1; } /* * Not interrupts flag per se, but interrupts can occur when * they are asserted, at least during our slot enable routine. */ if ((h->flags & STP4020_SOCKET_ENABLING) && (v & (STP4020_ISR0_WAITST | STP4020_ISR0_PWRON))) r = 1; } return (r); } int stp4020_iointr(arg) void *arg; { struct stp4020_softc *sc = arg; int i, r = 0; /* * Check each socket for pending requests. */ for (i = 0 ; i < STP4020_NSOCK; i++) { struct stp4020_socket *h; int v; h = &sc->sc_socks[i]; v = stp4020_rd_sockctl(h, STP4020_ISR0_IDX); if ((v & STP4020_ISR0_IOINT) != 0) { /* we can not deny this is ours, no matter what the card driver says. */ r = 1; /* ack interrupt */ stp4020_wr_sockctl(h, STP4020_ISR0_IDX, v); /* It's a card interrupt */ if ((h->flags & STP4020_SOCKET_BUSY) == 0) { printf("stp4020[%d]: spurious interrupt?\n", h->sock); continue; } /* Call card handler, if any */ if (h->intrhandler != NULL) { /* * We ought to be at an higher ipl level * than the callback, since the first * interrupt of this device is usually * higher than IPL_CLOCK. */ splassert(h->ipl); (*h->intrhandler)(h->intrarg); } } } return (r); } /* * The function gets the sbus speed and a access time and calculates * values for the CMDLNG and CMDDLAY registers. */ void stp4020_calc_speed(int bus_speed, int ns, int *length, int *delay) { int result; if (ns < STP4020_MEM_SPEED_MIN) ns = STP4020_MEM_SPEED_MIN; else if (ns > STP4020_MEM_SPEED_MAX) ns = STP4020_MEM_SPEED_MAX; result = ns * (bus_speed / 1000); if (result % 1000000) result = result / 1000000 + 1; else result /= 1000000; *length = result; /* the sbus frequency range is limited, so we can keep this simple */ *delay = ns <= STP4020_MEM_SPEED_MIN ? 1 : 2; } void stp4020_map_window(struct stp4020_socket *h, int win, int speed) { int v, length, delay; /* * According to the PC Card standard 300ns access timing should be * used for attribute memory access. Our pcmcia framework does not * seem to propagate timing information, so we use that * everywhere. */ stp4020_calc_speed(speed, 300, &length, &delay); /* * Fill in the Address Space Select and Base Address * fields of this windows control register 0. */ v = ((delay << STP4020_WCR0_CMDDLY_S) & STP4020_WCR0_CMDDLY_M) | ((length << STP4020_WCR0_CMDLNG_S) & STP4020_WCR0_CMDLNG_M); switch (win) { case STP_WIN_ATTR: v |= STP4020_WCR0_ASPSEL_AM; break; case STP_WIN_MEM: v |= STP4020_WCR0_ASPSEL_CM; break; case STP_WIN_IO: v |= STP4020_WCR0_ASPSEL_IO; break; } v |= (STP4020_ADDR2PAGE(0) & STP4020_WCR0_BASE_M); stp4020_wr_winctl(h, win, STP4020_WCR0_IDX, v); stp4020_wr_winctl(h, win, STP4020_WCR1_IDX, 1 << STP4020_WCR1_WAITREQ_S); } int stp4020_chip_mem_alloc(pch, size, pcmhp) pcmcia_chipset_handle_t pch; bus_size_t size; struct pcmcia_mem_handle *pcmhp; { struct stp4020_socket *h = (struct stp4020_socket *)pch; /* we can not do much here, defere work to _mem_map */ pcmhp->memt = h->wintag; pcmhp->size = size; pcmhp->addr = 0; pcmhp->mhandle = 0; pcmhp->realsize = size; return (0); } void stp4020_chip_mem_free(pch, pcmhp) pcmcia_chipset_handle_t pch; struct pcmcia_mem_handle *pcmhp; { } int stp4020_chip_mem_map(pch, kind, card_addr, size, pcmhp, offsetp, windowp) pcmcia_chipset_handle_t pch; int kind; bus_addr_t card_addr; bus_size_t size; struct pcmcia_mem_handle *pcmhp; bus_size_t *offsetp; int *windowp; { struct stp4020_socket *h = (struct stp4020_socket *)pch; int win = (kind & PCMCIA_MEM_ATTR) ? STP_WIN_ATTR : STP_WIN_MEM; pcmhp->memt = h->wintag; bus_space_subregion(h->wintag, h->windows[win].winaddr, card_addr, size, &pcmhp->memh); pcmhp->size = size; pcmhp->realsize = STP4020_WINDOW_SIZE - card_addr; *offsetp = 0; *windowp = win; return (0); } void stp4020_chip_mem_unmap(pch, win) pcmcia_chipset_handle_t pch; int win; { } int stp4020_chip_io_alloc(pch, start, size, align, pcihp) pcmcia_chipset_handle_t pch; bus_addr_t start; bus_size_t size; bus_size_t align; struct pcmcia_io_handle *pcihp; { struct stp4020_socket *h = (struct stp4020_socket *)pch; pcihp->iot = h->wintag; pcihp->ioh = h->windows[STP_WIN_IO].winaddr; pcihp->size = size; return (0); } void stp4020_chip_io_free(pch, pcihp) pcmcia_chipset_handle_t pch; struct pcmcia_io_handle *pcihp; { } int stp4020_chip_io_map(pch, width, offset, size, pcihp, windowp) pcmcia_chipset_handle_t pch; int width; bus_addr_t offset; bus_size_t size; struct pcmcia_io_handle *pcihp; int *windowp; { struct stp4020_socket *h = (struct stp4020_socket *)pch; pcihp->iot = h->wintag; bus_space_subregion(h->wintag, h->windows[STP_WIN_IO].winaddr, offset, size, &pcihp->ioh); *windowp = 0; return (0); } void stp4020_chip_io_unmap(pch, win) pcmcia_chipset_handle_t pch; int win; { } void stp4020_chip_socket_enable(pch) pcmcia_chipset_handle_t pch; { struct stp4020_socket *h = (struct stp4020_socket *)pch; int i, v; h->flags |= STP4020_SOCKET_ENABLING; /* this bit is mostly stolen from pcic_attach_card */ /* Power down the socket to reset it, clear the card reset pin */ stp4020_wr_sockctl(h, STP4020_ICR1_IDX, 0); /* * wait 300ms until power fails (Tpf). Then, wait 100ms since * we are changing Vcc (Toff). */ stp4020_delay((300 + 100) * 1000); /* Power up the socket */ v = STP4020_ICR1_MSTPWR; stp4020_wr_sockctl(h, STP4020_ICR1_IDX, v); /* * wait 100ms until power raise (Tpr) and 20ms to become * stable (Tsu(Vcc)). * * some machines require some more time to be settled * (another 200ms is added here). */ stp4020_delay((100 + 20 + 200) * 1000); v |= STP4020_ICR1_PCIFOE | STP4020_ICR1_VPP1_VCC; stp4020_wr_sockctl(h, STP4020_ICR1_IDX, v); /* * hold RESET at least 20us. */ stp4020_wr_sockctl(h, STP4020_ICR0_IDX, stp4020_rd_sockctl(h, STP4020_ICR0_IDX) | STP4020_ICR0_RESET); delay(20); stp4020_wr_sockctl(h, STP4020_ICR0_IDX, stp4020_rd_sockctl(h, STP4020_ICR0_IDX) & ~STP4020_ICR0_RESET); /* wait 20ms as per pc card standard (r2.01) section 4.3.6 */ stp4020_delay(20000); /* Wait for the chip to finish initializing (5 seconds max) */ for (i = 10000; i > 0; i--) { v = stp4020_rd_sockctl(h, STP4020_ISR0_IDX); /* If the card has been removed, abort */ if ((v & (STP4020_ISR0_CD1ST | STP4020_ISR0_CD2ST)) == 0) { h->flags &= ~STP4020_SOCKET_ENABLING; return; } if ((v & STP4020_ISR0_RDYST) != 0) break; delay(500); } if (i <= 0) { #ifdef STP4020_DEBUG printf("stp4020_chip_socket_enable: not ready: status %b\n", v, STP4020_ISR0_IOBITS); #endif h->flags &= ~STP4020_SOCKET_ENABLING; return; } v = stp4020_rd_sockctl(h, STP4020_ICR0_IDX); /* * Check the card type. * Enable socket I/O interrupts for IO cards. * We use level SB_INT[0] for I/O interrupts. */ if (pcmcia_card_gettype(h->pcmcia) == PCMCIA_IFTYPE_IO) { v &= ~(STP4020_ICR0_IOILVL | STP4020_ICR0_IFTYPE); v |= STP4020_ICR0_IFTYPE_IO | STP4020_ICR0_IOIE | STP4020_ICR0_IOILVL_SB0 | STP4020_ICR0_SPKREN; DPRINTF(("%s: configuring card for IO usage\n", h->sc->sc_dev.dv_xname)); } else { v &= ~(STP4020_ICR0_IOILVL | STP4020_ICR0_IFTYPE | STP4020_ICR0_SPKREN | STP4020_ICR0_IOIE); v |= STP4020_ICR0_IFTYPE_MEM; DPRINTF(("%s: configuring card for MEM ONLY usage\n", h->sc->sc_dev.dv_xname)); } stp4020_wr_sockctl(h, STP4020_ICR0_IDX, v); h->flags &= ~STP4020_SOCKET_ENABLING; } void stp4020_chip_socket_disable(pch) pcmcia_chipset_handle_t pch; { struct stp4020_socket *h = (struct stp4020_socket *)pch; int v; /* * Disable socket I/O interrupts. */ v = stp4020_rd_sockctl(h, STP4020_ICR0_IDX); v &= ~(STP4020_ICR0_IOILVL | STP4020_ICR0_IFTYPE | STP4020_ICR0_SPKREN | STP4020_ICR0_IOIE); stp4020_wr_sockctl(h, STP4020_ICR0_IDX, v); /* Power down the socket */ stp4020_wr_sockctl(h, STP4020_ICR1_IDX, 0); /* * wait 300ms until power fails (Tpf). */ stp4020_delay(300 * 1000); } void * stp4020_chip_intr_establish(pch, pf, ipl, handler, arg, xname) pcmcia_chipset_handle_t pch; struct pcmcia_function *pf; int ipl; int (*handler) (void *); void *arg; char *xname; { struct stp4020_socket *h = (struct stp4020_socket *)pch; h->intrhandler = handler; h->intrarg = arg; h->ipl = ipl; return (h); } void stp4020_chip_intr_disestablish(pch, ih) pcmcia_chipset_handle_t pch; void *ih; { struct stp4020_socket *h = (struct stp4020_socket *)pch; h->intrhandler = NULL; h->intrarg = NULL; } const char * stp4020_chip_intr_string(pch, ih) pcmcia_chipset_handle_t pch; void *ih; { if (ih == NULL) return ("couldn't establish interrupt"); else return (""); /* nothing for now */ } /* * Delay and possibly yield CPU. * XXX - assumes a context */ void stp4020_delay(ms) unsigned int ms; { unsigned int ticks; /* Convert to ticks */ ticks = (ms * hz) / 1000000; if (cold || ticks == 0) { delay(ms); return; } #ifdef DEBUG if (ticks > 60 * hz) panic("stp4020: preposterous delay: %u", ticks); #endif tsleep(&ticks, 0, "stp4020_delay", ticks); } #ifdef STP4020_DEBUG void stp4020_dump_regs(h) struct stp4020_socket *h; { /* * Dump control and status registers. */ printf("socket[%d] registers:\n" "\tICR0=%b\n\tICR1=%b\n\tISR0=%b\n\tISR1=%x\n", h->sock, stp4020_rd_sockctl(h, STP4020_ICR0_IDX), STP4020_ICR0_BITS, stp4020_rd_sockctl(h, STP4020_ICR1_IDX), STP4020_ICR1_BITS, stp4020_rd_sockctl(h, STP4020_ISR0_IDX), STP4020_ISR0_IOBITS, stp4020_rd_sockctl(h, STP4020_ISR1_IDX)); } #endif /* STP4020_DEBUG */