/* $OpenBSD: rfcomm_dlc.c,v 1.2 2008/02/24 21:34:48 uwe Exp $ */ /* $NetBSD: rfcomm_dlc.c,v 1.4 2007/11/03 17:20:17 plunky Exp $ */ /*- * Copyright (c) 2006 Itronix Inc. * All rights reserved. * * Written by Iain Hibbert for Itronix Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of Itronix Inc. may not be used to endorse * or promote products derived from this software without specific * prior written permission. * * THIS SOFTWARE IS PROVIDED BY ITRONIX INC. ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ITRONIX INC. BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND * ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #include #include #include #include #include #include #include #include #include /* * rfcomm_dlc_lookup(rfcomm_session, dlci) * * Find DLC on session with matching dlci */ struct rfcomm_dlc * rfcomm_dlc_lookup(struct rfcomm_session *rs, int dlci) { struct rfcomm_dlc *dlc; LIST_FOREACH(dlc, &rs->rs_dlcs, rd_next) { if (dlc->rd_dlci == dlci) break; } return dlc; } /* * rfcomm_dlc_newconn(rfcomm_session, dlci) * * handle a new dlc request (since its called from a couple of places) */ struct rfcomm_dlc * rfcomm_dlc_newconn(struct rfcomm_session *rs, int dlci) { struct rfcomm_session *ls; struct rfcomm_dlc *new, *dlc, *any, *best; struct sockaddr_bt laddr, raddr, addr; int chan; /* * Search amongst the listening DLC community for the best match for * address & channel. We keep listening DLC's hanging on listening * sessions in a last first order, so scan the entire bunch and keep * a note of the best address and BDADDR_ANY matches in order to find * the oldest and most specific match. */ l2cap_sockaddr(rs->rs_l2cap, &laddr); l2cap_peeraddr(rs->rs_l2cap, &raddr); chan = RFCOMM_CHANNEL(dlci); new = NULL; any = best = NULL; LIST_FOREACH(ls, &rfcomm_session_listen, rs_next) { l2cap_sockaddr(ls->rs_l2cap, &addr); if (addr.bt_psm != laddr.bt_psm) continue; if (bdaddr_same(&laddr.bt_bdaddr, &addr.bt_bdaddr)) { LIST_FOREACH(dlc, &ls->rs_dlcs, rd_next) { if (dlc->rd_laddr.bt_channel == chan) best = dlc; } } if (bdaddr_any(&addr.bt_bdaddr)) { LIST_FOREACH(dlc, &ls->rs_dlcs, rd_next) { if (dlc->rd_laddr.bt_channel == chan) any = dlc; } } } dlc = best ? best : any; /* XXX * Note that if this fails, we could have missed a chance to open * a connection - really need to rewrite the strategy for storing * listening DLC's so all can be checked in turn.. */ if (dlc != NULL) new = (*dlc->rd_proto->newconn)(dlc->rd_upper, &laddr, &raddr); if (new == NULL) { rfcomm_session_send_frame(rs, RFCOMM_FRAME_DM, dlci); return NULL; } new->rd_dlci = dlci; new->rd_mtu = rfcomm_mtu_default; new->rd_mode = dlc->rd_mode; memcpy(&new->rd_laddr, &laddr, sizeof(struct sockaddr_bt)); new->rd_laddr.bt_channel = chan; memcpy(&new->rd_raddr, &raddr, sizeof(struct sockaddr_bt)); new->rd_raddr.bt_channel = chan; new->rd_session = rs; new->rd_state = RFCOMM_DLC_WAIT_CONNECT; LIST_INSERT_HEAD(&rs->rs_dlcs, new, rd_next); return new; } /* * rfcomm_dlc_close(dlc, error) * * detach DLC from session and clean up */ void rfcomm_dlc_close(struct rfcomm_dlc *dlc, int err) { struct rfcomm_session *rs; struct rfcomm_credit *credit; KASSERT(dlc->rd_state != RFCOMM_DLC_CLOSED); /* Clear credit history */ rs = dlc->rd_session; SIMPLEQ_FOREACH(credit, &rs->rs_credits, rc_next) if (credit->rc_dlc == dlc) credit->rc_dlc = NULL; timeout_del(&dlc->rd_timeout); LIST_REMOVE(dlc, rd_next); dlc->rd_session = NULL; dlc->rd_state = RFCOMM_DLC_CLOSED; (*dlc->rd_proto->disconnected)(dlc->rd_upper, err); /* * It is the responsibility of the party who sends the last * DISC(dlci) to disconnect the session, but we will schedule * an expiry just in case that doesnt happen.. */ if (LIST_EMPTY(&rs->rs_dlcs)) { if (rs->rs_state == RFCOMM_SESSION_LISTEN) rfcomm_session_free(rs); else timeout_add(&rs->rs_timeout, rfcomm_ack_timeout * hz); } } /* * rfcomm_dlc_timeout(dlc) * * DLC timeout function is schedUled when we sent any of SABM, * DISC, MCC_MSC, or MCC_PN and should be cancelled when we get * the relevant response. There is nothing to do but shut this * DLC down. */ void rfcomm_dlc_timeout(void *arg) { struct rfcomm_dlc *dlc = arg; int s; s = splsoftnet(); if (dlc->rd_state != RFCOMM_DLC_CLOSED) rfcomm_dlc_close(dlc, ETIMEDOUT); else if (dlc->rd_flags & RFCOMM_DLC_DETACH) free(dlc, M_BLUETOOTH); splx(s); } /* * rfcomm_dlc_setmode(rfcomm_dlc) * * Set link mode for DLC. This is only called when the session is * already open, so we don't need to worry about any previous mode * settings. */ int rfcomm_dlc_setmode(struct rfcomm_dlc *dlc) { int mode = 0; KASSERT(dlc->rd_session != NULL); KASSERT(dlc->rd_session->rs_state == RFCOMM_SESSION_OPEN); DPRINTF("dlci %d, auth %s, encrypt %s, secure %s\n", dlc->rd_dlci, (dlc->rd_mode & RFCOMM_LM_AUTH ? "yes" : "no"), (dlc->rd_mode & RFCOMM_LM_ENCRYPT ? "yes" : "no"), (dlc->rd_mode & RFCOMM_LM_SECURE ? "yes" : "no")); if (dlc->rd_mode & RFCOMM_LM_AUTH) mode |= L2CAP_LM_AUTH; if (dlc->rd_mode & RFCOMM_LM_ENCRYPT) mode |= L2CAP_LM_ENCRYPT; if (dlc->rd_mode & RFCOMM_LM_SECURE) mode |= L2CAP_LM_SECURE; return l2cap_setopt(dlc->rd_session->rs_l2cap, SO_L2CAP_LM, &mode); } /* * rfcomm_dlc_connect(rfcomm_dlc) * * initiate DLC connection (session is already connected) */ int rfcomm_dlc_connect(struct rfcomm_dlc *dlc) { struct rfcomm_mcc_pn pn; int err = 0; KASSERT(dlc->rd_session != NULL); KASSERT(dlc->rd_session->rs_state == RFCOMM_SESSION_OPEN); KASSERT(dlc->rd_state == RFCOMM_DLC_WAIT_SESSION); /* * If we have not already sent a PN on the session, we must send * a PN to negotiate Credit Flow Control, and this setting will * apply to all future connections for this session. We ask for * this every time, in order to establish initial credits. */ memset(&pn, 0, sizeof(pn)); pn.dlci = dlc->rd_dlci; pn.priority = dlc->rd_dlci | 0x07; pn.mtu = htole16(dlc->rd_mtu); pn.flow_control = 0xf0; dlc->rd_rxcred = (dlc->rd_rxsize / dlc->rd_mtu); dlc->rd_rxcred = min(dlc->rd_rxcred, RFCOMM_CREDITS_DEFAULT); pn.credits = dlc->rd_rxcred; err = rfcomm_session_send_mcc(dlc->rd_session, 1, RFCOMM_MCC_PN, &pn, sizeof(pn)); if (err) return err; dlc->rd_state = RFCOMM_DLC_WAIT_CONNECT; timeout_add(&dlc->rd_timeout, rfcomm_mcc_timeout * hz); return 0; } /* * rfcomm_dlc_open(rfcomm_dlc) * * send "Modem Status Command" and mark DLC as open. */ int rfcomm_dlc_open(struct rfcomm_dlc *dlc) { struct rfcomm_mcc_msc msc; int err; KASSERT(dlc->rd_session != NULL); KASSERT(dlc->rd_session->rs_state == RFCOMM_SESSION_OPEN); memset(&msc, 0, sizeof(msc)); msc.address = RFCOMM_MKADDRESS(1, dlc->rd_dlci); msc.modem = dlc->rd_lmodem & 0xfe; /* EA = 0 */ msc.brk = 0x00 | 0x01; /* EA = 1 */ err = rfcomm_session_send_mcc(dlc->rd_session, 1, RFCOMM_MCC_MSC, &msc, sizeof(msc)); if (err) return err; timeout_add(&dlc->rd_timeout, rfcomm_mcc_timeout * hz); dlc->rd_state = RFCOMM_DLC_OPEN; (*dlc->rd_proto->connected)(dlc->rd_upper); return 0; } /* * rfcomm_dlc_start(rfcomm_dlc) * * Start sending data (and/or credits) for DLC. Our strategy is to * send anything we can down to the l2cap layer. When credits run * out, data will naturally bunch up. When not using credit flow * control, we limit the number of packets we have pending to reduce * flow control lag. * We should deal with channel priority somehow. */ void rfcomm_dlc_start(struct rfcomm_dlc *dlc) { struct rfcomm_session *rs = dlc->rd_session; struct mbuf *m; int len, credits; KASSERT(rs != NULL); KASSERT(rs->rs_state == RFCOMM_SESSION_OPEN); KASSERT(dlc->rd_state == RFCOMM_DLC_OPEN); for (;;) { credits = 0; len = dlc->rd_mtu; if (rs->rs_flags & RFCOMM_SESSION_CFC) { credits = (dlc->rd_rxsize / dlc->rd_mtu); credits -= dlc->rd_rxcred; credits = min(credits, RFCOMM_CREDITS_MAX); if (credits > 0) len--; if (dlc->rd_txcred == 0) len = 0; } else { if (rs->rs_flags & RFCOMM_SESSION_RFC) break; if (dlc->rd_rmodem & RFCOMM_MSC_FC) break; if (dlc->rd_pending > RFCOMM_CREDITS_DEFAULT) break; } if (dlc->rd_txbuf == NULL) len = 0; if (len == 0) { if (credits == 0) break; /* * No need to send small numbers of credits on their * own unless the other end hasn't many left. */ if (credits < RFCOMM_CREDITS_DEFAULT && dlc->rd_rxcred > RFCOMM_CREDITS_DEFAULT) break; m = NULL; } else { /* * take what data we can from (front of) txbuf */ m = dlc->rd_txbuf; if (len < m->m_pkthdr.len) { dlc->rd_txbuf = m_split(m, len, M_DONTWAIT); if (dlc->rd_txbuf == NULL) { dlc->rd_txbuf = m; break; } } else { dlc->rd_txbuf = NULL; len = m->m_pkthdr.len; } } DPRINTFN(10, "dlci %d send %d bytes, %d credits, rxcred = %d\n", dlc->rd_dlci, len, credits, dlc->rd_rxcred); if (rfcomm_session_send_uih(rs, dlc, credits, m)) { printf("%s: lost %d bytes on DLCI %d\n", __func__, len, dlc->rd_dlci); break; } dlc->rd_pending++; if (rs->rs_flags & RFCOMM_SESSION_CFC) { if (len > 0) dlc->rd_txcred--; if (credits > 0) dlc->rd_rxcred += credits; } } }