.\" $OpenBSD: crypt.3,v 1.27 2007/10/08 11:55:27 pyr Exp $
.\"
.\" FreeSec: libcrypt
.\"
.\" Copyright (c) 1994 David Burren
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 4. Neither the name of the author nor the names of other contributors
.\"    may be used to endorse or promote products derived from this software
.\"    without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\" Manual page, using -mandoc macros
.\"
.Dd $Mdocdate: October 8 2007 $
.Dt CRYPT 3
.Os
.Sh NAME
.Nm crypt ,
.Nm setkey ,
.Nm encrypt ,
.Nm des_setkey ,
.Nm des_cipher ,
.Nm bcrypt_gensalt ,
.Nm bcrypt ,
.Nm md5crypt
.Nd DES encryption
.Sh SYNOPSIS
.Fd #include <pwd.h>
.Fd #include <unistd.h>
.Ft char *
.Fn crypt "const char *key" "const char *setting"
.Ft int
.Fn setkey "const char *key"
.Ft int
.Fn encrypt "char *block" "int flag"
.Ft int
.Fn des_setkey "const char *key"
.Ft int
.Fn des_cipher "const char *in" "char *out" "int32_t salt" "int count"
.Ft char *
.Fn bcrypt_gensalt "u_int8_t log_rounds"
.Ft char *
.Fn bcrypt "const char *key" "const char *salt"
.Ft char *
.Fn md5crypt "const char *key" "const char *salt"
.Sh DESCRIPTION
The
.Fn crypt
function performs password encryption based on the
.Tn NBS
Data Encryption Standard (DES).
Additional code has been added to deter key search attempts and to use
stronger hashing algorithms.
.Pp
The first argument to
.Fn crypt
is a
.Dv NUL Ns -terminated
string, typically a user's typed password.
The second is in one of three forms:
if it begins with an underscore
.Pq Ql _
then an extended format is used
in interpreting both the key and the setting, as outlined below.
If it begins
with a string character
.Pq Ql $
and a number then a different algorithm is used depending on the number.
At the moment a
.Ql $1
chooses MD5 hashing and a
.Ql $2
chooses Blowfish hashing; see below for more information.
.Ss Extended crypt
The
.Ar key
is divided into groups of 8 characters (the last group is null-padded)
and the low-order 7 bits of each character (56 bits per group) are
used to form the DES key as follows:
the first group of 56 bits becomes the initial DES key.
For each additional group, the XOR of the encryption of the current DES
key with itself and the group bits becomes the next DES key.
.Pp
The setting is a 9-character array consisting of an underscore followed
by 4 bytes of iteration count and 4 bytes of salt.
These are encoded as printable characters, 6 bits per character,
least significant character first.
The values 0 to 63 are encoded as
.Dq \&./0-9A-Za-z .
This allows 24 bits for both
.Fa count
and
.Fa salt .
.Ss "MD5" crypt
For
.Tn MD5
crypt the version number,
.Fa salt
and the hashed password are separated by the
.Ql $
character.
The maximum length of a password is limited by
the length counter of the MD5 context, which is about
2**64.
A valid MD5 password entry looks like this:
.Pp
.Dq $1$caeiHQwX$hsKqOjrFRRN6K32OWkCBf1 .
.Pp
The whole MD5 password string is passed as
.Fa setting
for interpretation.
.Ss "Blowfish" crypt
The
.Tn Blowfish
version of crypt has 128 bits of
.Fa salt
in order to make building dictionaries of common passwords space consuming.
The initial state of the
.Tn Blowfish
cipher is expanded using the
.Fa salt
and the
.Fa password
repeating the process a variable number of rounds, which is encoded in
the password string.
The maximum password length is 72.
The final Blowfish password entry is created by encrypting the string
.Pp
.Dq OrpheanBeholderScryDoubt
.Pp
with the
.Tn Blowfish
state 64 times.
.Pp
The version number, the logarithm of the number of rounds and
the concatenation of salt and hashed password are separated by the
.Ql $
character.
An encoded
.Sq 8
would specify 256 rounds.
A valid Blowfish password looks like this:
.Pp
.Dq $2a$12$eIAq8PR8sIUnJ1HaohxX2O9x9Qlm2vK97LJ5dsXdmB.eXF42qjchC .
.Pp
The whole Blowfish password string is passed as
.Fa setting
for interpretation.
.Ss "Traditional" crypt
The first 8 bytes of the key are null-padded, and the low-order 7 bits of
each character is used to form the 56-bit
.Tn DES
key.
.Pp
The setting is a 2-character array of the ASCII-encoded salt.
Thus only 12 bits of
.Fa salt
are used.
.Fa count
is set to 25.
.Ss DES Algorithm
The
.Fa salt
introduces disorder in the
.Tn DES
algorithm in one of 16777216 or 4096 possible ways
(i.e., with 24 or 12 bits: if bit
.Em i
of the
.Ar salt
is set, then bits
.Em i
and
.Em i+24
are swapped in the
.Tn DES
E-box output).
.Pp
The DES key is used to encrypt a 64-bit constant using
.Ar count
iterations of
.Tn DES .
The value returned is a
.Dv NUL Ns -terminated
string, 20 or 13 bytes (plus NUL) in length, consisting of the
.Ar setting
followed by the encoded 64-bit encryption.
.Pp
The functions
.Fn encrypt ,
.Fn setkey ,
.Fn des_setkey ,
and
.Fn des_cipher
provide access to the
.Tn DES
algorithm itself.
.Fn setkey
is passed a 64-byte array of binary values (numeric 0 or 1).
A 56-bit key is extracted from this array by dividing the
array into groups of 8, and ignoring the last bit in each group.
That bit is reserved for a byte parity check by DES, but is ignored
by these functions.
.Pp
The
.Fa block
argument to
.Fn encrypt
is also a 64-byte array of binary values.
If the value of
.Fa flag
is 0,
.Fa block
is encrypted otherwise it is decrypted.
The result is returned in the original array
.Fa block
after using the key specified by
.Fn setkey
to process it.
.Pp
The argument to
.Fn des_setkey
is a character array of length 8.
The least significant bit (the parity bit) in each character is ignored,
and the remaining bits are concatenated to form a 56-bit key.
The function
.Fn des_cipher
encrypts (or decrypts if
.Fa count
is negative) the 64-bits stored in the 8 characters at
.Fa in
using
.Xr abs 3
of
.Fa count
iterations of
.Tn DES
and stores the 64-bit result in the 8 characters at
.Fa out
(which may be the same as
.Fa in ) .
The
.Fa salt
specifies perturbations to the
.Tn DES
E-box output as described above.
.Pp
The
.Fn crypt ,
.Fn setkey ,
and
.Fn des_setkey
functions all manipulate the same key space.
.Sh RETURN VALUES
The function
.Fn crypt
returns a pointer to the encrypted value on success, and
.Dv NULL
on failure.
The functions
.Fn setkey ,
.Fn encrypt ,
.Fn des_setkey ,
and
.Fn des_cipher
return 0 on success and 1 on failure.
.Sh SEE ALSO
.Xr login 1 ,
.Xr passwd 1 ,
.Xr blowfish 3 ,
.Xr getpass 3 ,
.Xr md5 3 ,
.Xr passwd 5
.Sh HISTORY
A rotor-based
.Fn crypt
function appeared in
.At v3 .
The current style
.Fn crypt
first appeared in
.At v7 .
.Pp
This library (FreeSec 1.0) was developed outside the United States of America
as an unencumbered replacement for the U.S.-only libcrypt encryption
library.
Programs linked against the
.Fn crypt
interface may be exported from the U.S.A. only if they use
.Fn crypt
solely for authentication purposes and avoid use of
the other programmer interfaces listed above.
Special care has been taken
in the library so that programs which only use the
.Fn crypt
interface do not pull in the other components.
.Sh AUTHORS
.An David Burren Aq davidb@werj.com.au
.Sh BUGS
The
.Fn crypt
function returns a pointer to static data, and subsequent calls to
.Fn crypt
will modify the same object.