/* $OpenBSD: smc83c170var.h,v 1.2 2008/06/26 05:42:16 ray Exp $ */ /* $NetBSD: smc83c170var.h,v 1.9 2005/02/04 02:10:37 perry Exp $ */ /*- * Copyright (c) 1998, 1999 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility, * NASA Ames Research Center. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #ifndef _DEV_IC_SMC83C170VAR_H_ #define _DEV_IC_SMC83C170VAR_H_ #include /* * Misc. definitions for the Standard Microsystems Corp. 83C170 * Ethernet PCI Integrated Controller (EPIC/100) driver. */ /* * Transmit descriptor list size. */ #define EPIC_NTXDESC 128 #define EPIC_NTXDESC_MASK (EPIC_NTXDESC - 1) #define EPIC_NEXTTX(x) ((x + 1) & EPIC_NTXDESC_MASK) /* * Receive descriptor list size. */ #define EPIC_NRXDESC 64 #define EPIC_NRXDESC_MASK (EPIC_NRXDESC - 1) #define EPIC_NEXTRX(x) ((x + 1) & EPIC_NRXDESC_MASK) /* * Control structures are DMA'd to the EPIC chip. We allocate them in * a single clump that maps to a single DMA segment to make several things * easier. */ struct epic_control_data { /* * The transmit descriptors. */ struct epic_txdesc ecd_txdescs[EPIC_NTXDESC]; /* * The receive descriptors. */ struct epic_rxdesc ecd_rxdescs[EPIC_NRXDESC]; /* * The transmit fraglists. */ struct epic_fraglist ecd_txfrags[EPIC_NTXDESC]; }; #define EPIC_CDOFF(x) offsetof(struct epic_control_data, x) #define EPIC_CDTXOFF(x) EPIC_CDOFF(ecd_txdescs[(x)]) #define EPIC_CDRXOFF(x) EPIC_CDOFF(ecd_rxdescs[(x)]) #define EPIC_CDFLOFF(x) EPIC_CDOFF(ecd_txfrags[(x)]) /* * Software state for transmit and receive desciptors. */ struct epic_descsoft { struct mbuf *ds_mbuf; /* head of mbuf chain */ bus_dmamap_t ds_dmamap; /* our DMA map */ }; /* * Software state per device. */ struct epic_softc { struct device sc_dev; /* generic device information */ bus_space_tag_t sc_st; /* bus space tag */ bus_space_handle_t sc_sh; /* bus space handle */ bus_dma_tag_t sc_dmat; /* bus DMA tag */ struct arpcom sc_arpcom; /* ethernet common data */ void *sc_sdhook; /* shutdown hook */ int sc_hwflags; /* info about board */ #define EPIC_HAS_BNC 0x01 /* BNC on serial interface */ #define EPIC_HAS_MII_FIBER 0x02 /* fiber on MII lxtphy */ #define EPIC_DUPLEXLED_ON_694 0x04 /* duplex LED by software */ struct mii_data sc_mii; /* MII/media information */ struct timeout sc_mii_timeout; /* MII timeout */ bus_dmamap_t sc_cddmamap; /* control data DMA map */ #define sc_cddma sc_cddmamap->dm_segs[0].ds_addr bus_dmamap_t sc_nulldmamap; /* DMA map for the pad buffer */ #define sc_nulldma sc_nulldmamap->dm_segs[0].ds_addr /* * Software state for transmit and receive descriptors. */ struct epic_descsoft sc_txsoft[EPIC_NTXDESC]; struct epic_descsoft sc_rxsoft[EPIC_NRXDESC]; /* * Control data structures. */ struct epic_control_data *sc_control_data; int sc_txpending; /* number of TX requests pending */ int sc_txdirty; /* first dirty TX descriptor */ int sc_txlast; /* last used TX descriptor */ int sc_rxptr; /* next ready RX descriptor */ u_int sc_serinst; /* ifmedia instance for serial mode */ }; #define EPIC_CDTXADDR(sc, x) ((sc)->sc_cddma + EPIC_CDTXOFF((x))) #define EPIC_CDRXADDR(sc, x) ((sc)->sc_cddma + EPIC_CDRXOFF((x))) #define EPIC_CDFLADDR(sc, x) ((sc)->sc_cddma + EPIC_CDFLOFF((x))) #define EPIC_CDTX(sc, x) (&(sc)->sc_control_data->ecd_txdescs[(x)]) #define EPIC_CDRX(sc, x) (&(sc)->sc_control_data->ecd_rxdescs[(x)]) #define EPIC_CDFL(sc, x) (&(sc)->sc_control_data->ecd_txfrags[(x)]) #define EPIC_DSTX(sc, x) (&(sc)->sc_txsoft[(x)]) #define EPIC_DSRX(sc, x) (&(sc)->sc_rxsoft[(x)]) #define EPIC_CDTXSYNC(sc, x, ops) \ bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \ EPIC_CDTXOFF((x)), sizeof(struct epic_txdesc), (ops)) #define EPIC_CDRXSYNC(sc, x, ops) \ bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \ EPIC_CDRXOFF((x)), sizeof(struct epic_rxdesc), (ops)) #define EPIC_CDFLSYNC(sc, x, ops) \ bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \ EPIC_CDFLOFF((x)), sizeof(struct epic_fraglist), (ops)) #define EPIC_INIT_RXDESC(sc, x) \ do { \ struct epic_descsoft *__ds = EPIC_DSRX((sc), (x)); \ struct epic_rxdesc *__rxd = EPIC_CDRX((sc), (x)); \ struct mbuf *__m = __ds->ds_mbuf; \ \ /* \ * Note we scoot the packet forward 2 bytes in the buffer \ * so that the payload after the Ethernet header is aligned \ * to a 4 byte boundary. \ */ \ __m->m_data = __m->m_ext.ext_buf + 2; \ __rxd->er_bufaddr = __ds->ds_dmamap->dm_segs[0].ds_addr + 2; \ __rxd->er_control = RXCTL_BUFLENGTH(__m->m_ext.ext_size - 2); \ __rxd->er_rxstatus = ER_RXSTAT_OWNER; \ __rxd->er_nextdesc = EPIC_CDRXADDR((sc), EPIC_NEXTRX((x))); \ EPIC_CDRXSYNC((sc), (x), BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); \ } while (/* CONSTCOND */ 0) #ifdef _KERNEL void epic_attach(struct epic_softc *, const char *); int epic_intr(void *); #endif /* _KERNEL */ #endif /* _DEV_IC_SMC83C170VAR_H_ */