/* $OpenBSD: ichreg.h,v 1.7 2005/12/18 12:09:04 grange Exp $ */ /* * Copyright (c) 2004, 2005 Alexander Yurchenko * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #ifndef _DEV_PCI_ICHREG_H_ #define _DEV_PCI_ICHREG_H_ /* * Intel I/O Controller Hub (ICH) register definitions. */ /* * LPC interface bridge registers. */ /* PCI configuration registers */ #define ICH_PMBASE 0x40 /* ACPI base address */ #define ICH_ACPI_CNTL 0x44 /* ACPI control */ #define ICH_ACPI_CNTL_ACPI_EN (1 << 4) /* ACPI enable */ #define ICH_GEN_PMCON1 0xa0 /* general PM configuration */ /* ICHx-M only */ #define ICH_GEN_PMCON1_SS_EN 0x08 /* enable SpeedStep */ /* Power management I/O registers */ #define ICH_PM_TMR 0x08 /* PM timer */ /* ICHx-M only */ #define ICH_PM_CNTL 0x20 /* power management control */ #define ICH_PM_ARB_DIS 0x01 /* disable arbiter */ #define ICH_PM_SS_CNTL 0x50 /* SpeedStep control */ #define ICH_PM_SS_STATE_LOW 0x01 /* low power state */ #define ICH_PMSIZE 128 /* ACPI I/O space size */ /* * SMBus controller registers. */ /* PCI configuration registers */ #define ICH_SMB_BASE 0x20 /* SMBus base address */ #define ICH_SMB_HOSTC 0x40 /* host configuration */ #define ICH_SMB_HOSTC_HSTEN (1 << 0) /* enable host controller */ #define ICH_SMB_HOSTC_SMIEN (1 << 1) /* generate SMI */ #define ICH_SMB_HOSTC_I2CEN (1 << 2) /* enable I2C commands */ /* SMBus I/O registers */ #define ICH_SMB_HS 0x00 /* host status */ #define ICH_SMB_HS_BUSY (1 << 0) /* running a command */ #define ICH_SMB_HS_INTR (1 << 1) /* command completed */ #define ICH_SMB_HS_DEVERR (1 << 2) /* command error */ #define ICH_SMB_HS_BUSERR (1 << 3) /* transaction collision */ #define ICH_SMB_HS_FAILED (1 << 4) /* failed bus transaction */ #define ICH_SMB_HS_SMBAL (1 << 5) /* SMBALERT# asserted */ #define ICH_SMB_HS_INUSE (1 << 6) /* bus semaphore */ #define ICH_SMB_HS_BDONE (1 << 7) /* byte received/transmitted */ #define ICH_SMB_HS_BITS "\020\001BUSY\002INTR\003DEVERR\004BUSERR\005FAILED\006SMBAL\007INUSE\010BDONE" #define ICH_SMB_HC 0x02 /* host control */ #define ICH_SMB_HC_INTREN (1 << 0) /* enable interrupts */ #define ICH_SMB_HC_KILL (1 << 1) /* kill current transaction */ #define ICH_SMB_HC_CMD_QUICK (0 << 2) /* QUICK command */ #define ICH_SMB_HC_CMD_BYTE (1 << 2) /* BYTE command */ #define ICH_SMB_HC_CMD_BDATA (2 << 2) /* BYTE DATA command */ #define ICH_SMB_HC_CMD_WDATA (3 << 2) /* WORD DATA command */ #define ICH_SMB_HC_CMD_PCALL (4 << 2) /* PROCESS CALL command */ #define ICH_SMB_HC_CMD_BLOCK (5 << 2) /* BLOCK command */ #define ICH_SMB_HC_CMD_I2CREAD (6 << 2) /* I2C READ command */ #define ICH_SMB_HC_CMD_BLOCKP (7 << 2) /* BLOCK PROCESS command */ #define ICH_SMB_HC_LASTB (1 << 5) /* last byte in block */ #define ICH_SMB_HC_START (1 << 6) /* start transaction */ #define ICH_SMB_HC_PECEN (1 << 7) /* enable PEC */ #define ICH_SMB_HCMD 0x03 /* host command */ #define ICH_SMB_TXSLVA 0x04 /* transmit slave address */ #define ICH_SMB_TXSLVA_READ (1 << 0) /* read direction */ #define ICH_SMB_TXSLVA_ADDR(x) (((x) & 0x7f) << 1) /* 7-bit address */ #define ICH_SMB_HD0 0x05 /* host data 0 */ #define ICH_SMB_HD1 0x06 /* host data 1 */ #define ICH_SMB_HBDB 0x07 /* host block data byte */ #define ICH_SMB_PEC 0x08 /* PEC data */ #define ICH_SMB_RXSLVA 0x09 /* receive slave address */ #define ICH_SMB_SD 0x0a /* receive slave data */ #define ICH_SMB_SD_MSG0(x) ((x) & 0xff) /* data message byte 0 */ #define ICH_SMB_SD_MSG1(x) ((x) >> 8) /* data message byte 1 */ #define ICH_SMB_AS 0x0c /* auxiliary status */ #define ICH_SMB_AS_CRCE (1 << 0) /* CRC error */ #define ICH_SMB_AS_TCO (1 << 1) /* advanced TCO mode */ #define ICH_SMB_AC 0x0d /* auxiliary control */ #define ICH_SMB_AC_AAC (1 << 0) /* automatically append CRC */ #define ICH_SMB_AC_E32B (1 << 1) /* enable 32-byte buffer */ #define ICH_SMB_SMLPC 0x0e /* SMLink pin control */ #define ICH_SMB_SMLPC_LINK0 (1 << 0) /* SMLINK0 pin state */ #define ICH_SMB_SMLPC_LINK1 (1 << 1) /* SMLINK1 pin state */ #define ICH_SMB_SMLPC_CLKC (1 << 2) /* SMLINK0 pin is untouched */ #define ICH_SMB_SMBPC 0x0f /* SMBus pin control */ #define ICH_SMB_SMBPC_CLK (1 << 0) /* SMBCLK pin state */ #define ICH_SMB_SMBPC_DATA (1 << 1) /* SMBDATA pin state */ #define ICH_SMB_SMBPC_CLKC (1 << 2) /* SMBCLK pin is untouched */ #define ICH_SMB_SS 0x10 /* slave status */ #define ICH_SMB_SS_HN (1 << 0) /* Host Notify command */ #define ICH_SMB_SCMD 0x11 /* slave command */ #define ICH_SMB_SCMD_INTREN (1 << 0) /* enable interrupts on HN */ #define ICH_SMB_SCMD_WKEN (1 << 1) /* wake on HN */ #define ICH_SMB_SCMD_SMBALDS (1 << 2) /* disable SMBALERT# intr */ #define ICH_SMB_NDADDR 0x14 /* notify device address */ #define ICH_SMB_NDADDR_ADDR(x) ((x) >> 1) /* 7-bit address */ #define ICH_SMB_NDLOW 0x16 /* notify data low byte */ #define ICH_SMB_NDHIGH 0x17 /* notify data high byte */ /* * 6300ESB watchdog timer registers. */ /* PCI configuration registers */ #define ICH_WDT_BASE 0x10 /* memory space base address */ #define ICH_WDT_CONF 0x60 /* configuration register */ #define ICH_WDT_CONF_MASK 0xffff /* 16-bit register */ #define ICH_WDT_CONF_INT_MASK 0x3 /* interrupt type */ #define ICH_WDT_CONF_INT_IRQ 0x0 /* IRQ (APIC 1, INT 10) */ #define ICH_WDT_CONF_INT_SMI 0x2 /* SMI */ #define ICH_WDT_CONF_INT_DIS 0x3 /* disabled */ #define ICH_WDT_CONF_PRE (1 << 2) /* 2^5 clock divisor */ #define ICH_WDT_CONF_OUTDIS (1 << 5) /* WDT_TOUT# output disabled */ #define ICH_WDT_LOCK 0x68 /* lock register */ #define ICH_WDT_LOCK_LOCKED (1 << 0) /* register locked */ #define ICH_WDT_LOCK_ENABLED (1 << 1) /* WDT enabled */ #define ICH_WDT_LOCK_FREERUN (1 << 2) /* free running mode */ /* Memory mapped registers */ #define ICH_WDT_PRE1 0x00 /* preload value 1 */ #define ICH_WDT_PRE2 0x04 /* preload value 2 */ #define ICH_WDT_GIS 0x08 /* general interrupt status */ #define ICH_WDT_GIS_ACTIVE (1 << 0) /* interrupt active */ #define ICH_WDT_RELOAD 0x0c /* reload register */ #define ICH_WDT_RELOAD_RLD (1 << 8) /* safe reload */ #define ICH_WDT_RELOAD_TIMEOUT (1 << 9) /* timeout occured */ #endif /* !_DEV_PCI_ICHREG_H_ */