/* $OpenBSD: pciide_piix_reg.h,v 1.11 2006/04/25 09:09:42 jsg Exp $ */ /* $NetBSD: pciide_piix_reg.h,v 1.5 2001/01/05 15:29:40 bouyer Exp $ */ /* * Copyright (c) 1998 Manuel Bouyer. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Manuel Bouyer. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ #ifndef _DEV_PCI_PCIIDE_PIIX_REG_H_ #define _DEV_PCI_PCIIDE_PIIX_REG_H_ /* * Registers definitions for Intel's PIIX series PCI IDE controllers. * See Intel's * "82371FB (PIIX) and 82371SB (PIIX3) PCI ISA IDE XCELERATOR" * "82371AB PCI-TO-ISA / IDE XCELERATOR (PIIX4)" and * "Intel 82801AA (ICH) and Intel 82801AB (ICH0) I/O Controller Hub" * available from http://developer.intel.com/ */ /* * Bus master interface base address register */ #define PIIX_BMIBA 0x20 #define PIIX_BMIBA_ADDR(x) (x & 0x0000FFFF0) #define PIIX_BMIBA_RTE(x) (x & 0x000000001) #define PIIX_BMIBA_RTE_IO 0x000000001 /* base addr maps to I/O space */ /* * IDE timing register * 0x40/0x41 is for primary, 0x42/0x43 for secondary channel */ #define PIIX_IDETIM 0x40 #define PIIX_IDETIM_READ(x, channel) (((x) >> (16 * (channel))) & 0x0000FFFF) #define PIIX_IDETIM_SET(x, bytes, channel) \ ((x) | ((bytes) << (16 * (channel)))) #define PIIX_IDETIM_CLEAR(x, bytes, channel) \ ((x) & ~((bytes) << (16 * (channel)))) #define PIIX_IDETIM_IDE 0x8000 /* PIIX decode IDE registers */ #define PIIX_IDETIM_SITRE 0x4000 /* slaves IDE timing registers enabled (PIIX3/4 only) */ #define PIIX_IDETIM_ISP_MASK 0x3000 /* IOrdy sample point */ #define PIIX_IDETIM_ISP_SHIFT 12 #define PIIX_IDETIM_ISP_SET(x) ((x) << PIIX_IDETIM_ISP_SHIFT) #define PIIX_IDETIM_RTC_MASK 0x0300 /* recovery time */ #define PIIX_IDETIM_RTC_SHIFT 8 #define PIIX_IDETIM_RTC_SET(x) ((x) << PIIX_IDETIM_RTC_SHIFT) #define PIIX_IDETIM_DTE(d) (0x0008 << (4 * (d))) /* DMA timing only */ #define PIIX_IDETIM_PPE(d) (0x0004 << (4 * (d))) /* prefetch/posting */ #define PIIX_IDETIM_IE(d) (0x0002 << (4 * (d))) /* IORDY enable */ #define PIIX_IDETIM_TIME(d) (0x0001 << (4 * (d))) /* Fast timing enable */ /* * Slave IDE timing register (PIIX3/4 only) * This register must be enabled via the PIIX_IDETIM_SITRE bit */ #define PIIX_SIDETIM 0x44 #define PIIX_SIDETIM_ISP_MASK(channel) (0x0c << ((channel) * 4)) #define PIIX_SIDETIM_ISP_SHIFT 2 #define PIIX_SIDETIM_ISP_SET(x, channel) \ (x << (PIIX_SIDETIM_ISP_SHIFT + ((channel) * 4))) #define PIIX_SIDETIM_RTC_MASK(channel) (0x03 << ((channel) * 4)) #define PIIX_SIDETIM_RTC_SHIFT 0 #define PIIX_SIDETIM_RTC_SET(x, channel) \ (x << (PIIX_SIDETIM_RTC_SHIFT + ((channel) * 4))) /* * Ultra DMA/33 register (PIIX4 only) */ #define PIIX_UDMAREG 0x48 /* Control register */ #define PIIX_UDMACTL_DRV_EN(channel, drive) (0x01 << ((channel) * 2 + (drive))) /* Ultra DMA/33 timing register (PIIX4 only) */ #define PIIX_UDMATIM_SHIFT 16 #define PIIX_UDMATIM_SET(x, channel, drive) \ (((x) << ((channel * 8) + (drive * 4))) << PIIX_UDMATIM_SHIFT) /* * IDE config register (ICH/ICH0/ICH2 only) */ #define PIIX_CONFIG 0x54 #define PIIX_CONFIG_PINGPONG 0x0400 /* The following are only for the 82801AA (ICH) and 82801BA (ICH2) */ #define PIIX_CONFIG_CR(channel, drive) (0x0010 << ((channel) * 2 + (drive))) #define PIIX_CONFIG_UDMA66(channel, drive) (0x0001 << ((channel) * 2 + (drive))) /* The following are only for the 82801BA (ICH2) */ #define PIIX_CONFIG_UDMA100(channel, drive) (0x1000 << ((channel) * 2 + (drive))) /* * these tables define the differents values to upload to the * ISP and RTC registers for the various PIO and DMA mode * (from the PIIX4 doc). */ static int8_t piix_isp_pio[] = {0x00, 0x00, 0x01, 0x02, 0x02}; static int8_t piix_rtc_pio[] = {0x00, 0x00, 0x00, 0x01, 0x03}; static int8_t piix_isp_dma[] = {0x00, 0x02, 0x02}; static int8_t piix_rtc_dma[] = {0x00, 0x02, 0x03}; static int8_t piix4_sct_udma[] = {0x00, 0x01, 0x02, 0x01, 0x02, 0x01}; /* * ICH5/ICH5R SATA registers definitions */ #define ICH5_SATA_MAP 0x90 /* Address Map Register */ #define ICH5_SATA_MAP_MV_MASK 0x07 /* Map Value mask */ #define ICH5_SATA_MAP_COMBINED 0x04 /* Combined mode */ #define ICH5_SATA_PI 0x09 /* Program Interface register */ #define ICH5_SATA_PI_PRI_NATIVE 0x01 /* Put Pri IDE channel in native mode */ #define ICH5_SATA_PI_SEC_NATIVE 0x04 /* Put Sec IDE channel in native mode */ #define ICH_SATA_PCS 0x92 /* Port Control and Status Register */ #define ICH_SATA_PCS_P0E 0x01 /* Port 0 enabled */ #define ICH_SATA_PCS_P1E 0x02 /* Port 1 enabled */ #define ICH_SATA_PCS_P0P 0x10 /* Port 0 present */ #define ICH_SATA_PCS_P1P 0x20 /* Port 1 present */ /* * ICH6/ICH7 SATA registers definitions */ #define ICH6_SATA_MAP_CMB_MASK 0x03 /* Combined mode bits */ #define ICH6_SATA_MAP_CMB_PRI 0x01 /* Combined mode, IDE Primary */ #define ICH6_SATA_MAP_CMB_SEC 0x02 /* Combined mode, IDE Secondary */ #define ICH7_SATA_MAP_SMS_MASK 0xc0 /* SATA Mode Select */ #define ICH7_SATA_MAP_SMS_IDE 0x00 #define ICH7_SATA_MAP_SMS_AHCI 0x40 #define ICH7_SATA_MAP_SMS_RAID 0x80 #endif /* !_DEV_PCI_PCIIDE_PIIX_REG_H_ */