/* $OpenBSD: fdformat.c,v 1.18 2007/11/26 09:28:34 martynas Exp $ */ /* * Copyright (C) 1992-1994 by Joerg Wunsch, Dresden * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * FreeBSD: * format a floppy disk * * Added FD_GTYPE ioctl, verifying, proportional indicators. * Serge Vakulenko, vak@zebub.msk.su * Sat Dec 18 17:45:47 MSK 1993 * * Final adaptation, change format/verify logic, add separate * format gap/interleave values * Andrew A. Chernov, ache@astral.msk.su * Thu Jan 27 00:47:24 MSK 1994 */ #include #include #include #include #include #include #include #include #include #include #include #include extern const char *__progname; static void format_track(int fd, int cyl, int secs, int head, int rate, int gaplen, int secsize, int fill, int interleave) { struct fd_formb f; int i,j; int il[FD_MAX_NSEC + 1]; memset(il,0,sizeof il); for(j = 0, i = 1; i <= secs; i++) { while(il[(j%secs)+1]) j++; il[(j%secs)+1] = i; j += interleave; } f.format_version = FD_FORMAT_VERSION; f.head = head; f.cyl = cyl; f.transfer_rate = rate; f.fd_formb_secshift = secsize; f.fd_formb_nsecs = secs; f.fd_formb_gaplen = gaplen; f.fd_formb_fillbyte = fill; for(i = 0; i < secs; i++) { f.fd_formb_cylno(i) = cyl; f.fd_formb_headno(i) = head; f.fd_formb_secno(i) = il[i+1]; f.fd_formb_secsize(i) = secsize; } if (ioctl(fd, FD_FORM, (caddr_t)&f) < 0) err(1, "FD_FORM"); } static int verify_track(int fd, int track, int tracksize) { static char *buf = 0; static int bufsz = 0; int fdopts = -1, ofdopts, rv = 0; if (ioctl(fd, FD_GOPTS, &fdopts) < 0) warn("FD_GOPTS"); else { ofdopts = fdopts; fdopts |= FDOPT_NORETRY; (void)ioctl(fd, FD_SOPTS, &fdopts); } if (bufsz < tracksize) { if (buf) free (buf); bufsz = tracksize; buf = 0; } if (! buf) buf = malloc (bufsz); if (! buf) { fprintf (stderr, "\nfdformat: out of memory\n"); exit (2); } if (lseek (fd, (off_t) track*tracksize, SEEK_SET) < 0) rv = -1; /* try twice reading it, without using the normal retrier */ else if (read (fd, buf, tracksize) != tracksize && read (fd, buf, tracksize) != tracksize) rv = -1; if (fdopts != -1) (void)ioctl(fd, FD_SOPTS, &ofdopts); return (rv); } static void usage(void) { printf("usage: %s [-nqv] [-c cyls] [-F fillbyte] [-g gap3len] ", __progname); printf("[-h heads]\n"); printf("\t[-i intleave] [-r rate] [-S secshft] [-s secs]\n"); printf("\t[-t steps_per_track] device_name\n"); printf("Options:\n"); printf("\t-n\tdon't verify floppy after formatting\n"); printf("\t-q\tsuppress any normal output, don't ask for confirmation\n"); printf("\t-v\tdon't format, verify only\n"); printf("\tdevname\tthe full name of floppy device or in short form fd0, fd1\n"); printf("Obscure options:\n"); printf("\t-c #\tspecify number of cylinders, 40 or 80\n"); printf("\t-F #\tspecify fill byte\n"); printf("\t-g #\tspecify gap length\n"); printf("\t-h #\tspecify number of floppy heads, 1 or 2\n"); printf("\t-i #\tspecify interleave factor\n"); printf("\t-r #\tspecify data rate, 250, 300 or 500 kbps\n"); printf("\t-S #\tspecify sector size, 0=128, 1=256, 2=512 bytes\n"); printf("\t-s #\tspecify number of sectors per track, 9, 10, 15 or 18\n"); printf("\t-t #\tnumber of steps per track\n"); exit(2); } static int yes(void) { char reply[256], *p; for (;;) { fflush(stdout); if (!fgets(reply, sizeof(reply), stdin)) return (0); for (p=reply; *p==' ' || *p=='\t'; ++p) continue; if (*p=='y' || *p=='Y') return (1); if (*p=='n' || *p=='N' || *p=='\n' || *p=='\r') return (0); printf("Answer `yes' or `no': "); } } int main(int argc, char *argv[]) { int cyls = -1, secs = -1, heads = -1, intleave = -1; int rate = -1, gaplen = -1, secsize = -1, steps = -1; int fill = 0xf6, quiet = 0, verify = 1, verify_only = 0; int fd, c, track, error, tracks_per_dot, bytes_per_track, errs; char *devname; struct fd_type fdt; while((c = getopt(argc, argv, "c:s:h:r:g:S:F:t:i:qvn")) != -1) switch (c) { case 'c': /* # of cyls */ cyls = atoi(optarg); break; case 's': /* # of secs per track */ secs = atoi(optarg); break; case 'h': /* # of heads */ heads = atoi(optarg); break; case 'r': /* transfer rate, kilobyte/sec */ rate = atoi(optarg); break; case 'g': /* length of GAP3 to format with */ gaplen = atoi(optarg); break; case 'S': /* sector size shift factor (1 << S)*128 */ secsize = atoi(optarg); break; case 'F': /* fill byte, C-like notation allowed */ fill = (int)strtol(optarg, (char **)0, 0); break; case 't': /* steps per track */ steps = atoi(optarg); break; case 'i': /* interleave factor */ intleave = atoi(optarg); break; case 'q': quiet = 1; break; case 'n': verify = 0; break; case 'v': verify = 1; verify_only = 1; break; case '?': default: usage(); } if (optind != argc - 1) usage(); if ((fd = opendev(argv[optind], O_RDWR, OPENDEV_PART, &devname)) < 0) err(1, "%s", devname); if (ioctl(fd, FD_GTYPE, &fdt) < 0) errx(1, "not a floppy disk: %s", devname); switch (rate) { case -1: break; case 250: fdt.rate = FDC_250KBPS; break; case 300: fdt.rate = FDC_300KBPS; break; case 500: fdt.rate = FDC_500KBPS; break; default: errx(1, "invalid transfer rate: %d", rate); } if (cyls >= 0) fdt.tracks = cyls; if (secs >= 0) fdt.sectrac = secs; if (fdt.sectrac > FD_MAX_NSEC) errx(1, "too many sectors per track, max value is %d", FD_MAX_NSEC); if (heads >= 0) fdt.heads = heads; if (gaplen >= 0) fdt.gap2 = gaplen; if (secsize >= 0) fdt.secsize = secsize; if (steps >= 0) fdt.step = steps; bytes_per_track = fdt.sectrac * (1<= 0 ? intleave : 1); if (!quiet && !((track + 1) % tracks_per_dot)) { putchar('F'); fflush(stdout); } } if (verify) { if (verify_track(fd, track, bytes_per_track) < 0) error = errs = 1; if (!quiet && !((track + 1) % tracks_per_dot)) { if (!verify_only) putchar('\b'); if (error) { putchar('E'); error = 0; } else putchar('V'); fflush(stdout); } } } close(fd); if (!quiet) printf(" done.\n"); exit(errs); }